Guitar pedal board routing

Long Live FX Loops (but not in my amps)!

Honestly, I have nothing against effect loops. They have their role in certain high gain amps and do what’s needed to be done greatly: tapping into the preamp output signal, and making it available (via a tube or a solid state buffer to level out any possible impedance mismatches) to external FX processors then returning it in the amp’s power stage.

But if I graft a typical active FX loop as we know it, (and believe me, I tried it) in any of my Low-Gain Gabriel V18 or V33, the tone morphs into  something way far from the typical character and dynamics, with a noticeable gain loss that results in a wimpy sound, something that is the last thing on my menu.

High Gain vs Low Gain Amps

Leaving all “class-talk” behind, there are generally two kind of guitar amps on the market today:

High Gain amps, where the signal gets over driven in the preamp, then served further to the power section that does little more than just amplify it. So in a high-gain amp, the majority of the tone characteristics are typically shaped in the preamp.
Here, the effect loop makes great sense since the signal sent to the effect processors has already an identity without loosing anything of its original character.

Low Gain amps where the tone is not saturated in the preamp section (the signal is quite clean at the preamp output) but rather by the power tubes when driven at higher volume levels. This results in a very characteristic overdrive shape distinct to these kind of amps. The Gabriel amps fit in this category.

Now, besides the fact that grafting a buffered effect loop into my low gain Gabriel V18 or V33 might come close to a blasphemy punishable by being burned at the stake, it would make no sense since the clean preamp signal still needs to receive its character and overdrive from the power tubes and an effected preamp output signal will alter the final character of the tone, robbing it of its precious gain and dynamics that’s so needed for the power tubes to do their magic.

The Workaround

As I often mention, the 18 watt Forum is a wealth of information with a lot of folks who are willing share their guitar amp building tips and wisdom. And that’s how I found out about this cool way of wiring your Gabriel V18 or V33 (or 18 watt amp for that matter) so it can simulate a wet/dry scenario of an FX Loop. In fact it is more than a simulation – it is a real effect routing with separate control on the dry and wet signal.

Simply, go with your guitar in the BRIGHT channel, then with another guitar cord, patch in the parallel jack of that same BRIGHT channel (this is your FX Send) and plug it into your FX chain input. The output of your guitar pedal board (FX Return) will go into the NORMAL channel input (I like to use the lower input jack).

This way you control your dry signal with the BRIGHT channel and the wet signal with your NORMAL channel. Simple as that! Diagrams below to help explain:

Pseudo FX Loop Diagram

Now, you can get creative here. You can group your pedals per channel having even more control over the levels.

For instance you can  have all your overdrive pedals right in front of your amp going into the BRIGHT channel and have all modulation pedals placed in the FX Loop, going into the NORMAL channel.

This way you have independent control (on the NORMAL channel) over the amount of modulated signal from your modulation pedals grouped within the FX Loop.  The guitar signal going into the modulation pedal group FX Loop will already be ‘effected’ by the overdrive pedal group you have going into the BRIGHT channel – but in this routing you control your balance between the over driven and modulated tone. Diagram below that explains what I mean:

FX Loop 2

Yes, the two channels are out of phase on my amps. So if you would patch the two channels directly with a cable, the tone will sound boxy. But when there’s a pedal chain on its path, it really doesn’t matter since the tone is already processed and you cannot perceive the out of phase coloration.

Here’s a detail of the amp channel connection:

It is a very simple setup that literally gives you the same options that an FX Loop would offer but without compromising the tone, or any of the internal circuitry, and having the full rich tone of the overdriven power tubes.

Related posts

• Paul Riario and Gabriel V33 Video (1)
• Gabriel Amps Clothing Line (0)
• V18 Video Demo (0)
• The Magic Eye Wink (13)
• Make Your Own Guitar Pedal Coupler Cables (5)

So finally here it is! The Gabriel Amps Clothing Line, a fashionable, wide variety of apparel in various styles, colors and sizes! Take your pick!

Gabriel T

From T-Shirts to coffee mugs and beyond am working on a couple more Gabriel products so check back regularly because I will be making these available as I finish them.

Show off that you are an owner (or a fan) of one of the finest hand-wired guitar amps on the market!

create & buy custom products at Zazzle

Related posts

• The Loopy Effect Loop (2)
• V18 Video Demo (0)
• The Magic Eye Wink (13)
• Paul Riario and Gabriel V33 Video (1)
• Gabriel V33 Demo by Justin Ostrander (2)

Paul Riario, did an exceptional video demonstration of the Gabriel V33 guitar amp, that was coupled with the print review that appeared in the Guitar World magazine a while ago (by Terry Buddingh). Paul explains in very easy terms the V33’s features as well as the footswitch functions. Sit back relax and enjoy the video!

It’s worth watching.

Related posts

• The Loopy Effect Loop (2)
• Tube Heaters Wiring (4)
• Gabriel V33 Demo by Justin Ostrander (2)
• Gabriel Amps Clothing Line (0)
• V18 Video Demo (0)

Steve Gerlach of Fat Tone Guitars flexes the muscles of the Ampeg Dan Armstrong AMD100 guitar and the Gabriel V18 1×12″ Combo.

A gem in the crown of Gabriel Amps, the V18 guitar amp combo pulls the best and most coveted vintage tones, in superb compact and light 1×12″ box, ready to serve you for your weekend gigs without breaking your back.

And as if that’s not enough of a treat, they offer a super BONUS if you can email the the names of the songs Steve played for a 10% discount at www.fattoneguitars.com through for 1 year!!!! Hear that amp howlin’!

Related posts

• V18 Video Demo (0)
• The Loopy Effect Loop (2)
• The Jumpy Mod (56)
• Paul Riario and Gabriel V33 Video (1)
• Gabriel V33 Demo by Justin Ostrander (2)

In this Gabriel V33 Guitar Combo Amp (2×12″) demo he demonstrates the versatility of using the amp plugged direct in as well as with numerous guitar effects.

As the Gabriel V33 guitar amp has plenty headroom, it becomes a tone machine packed to please the most picky guitar player (pun intended). In fact, many users noticed that the amps is so touch sensitive that actually helped them cure their sloppy playing.

Enjoy Justin’s demo of the V33 amp!

Related posts

• V18 Video Demo (0)
• The Loopy Effect Loop (2)
• The Jumpy Mod (56)
• Paul Riario and Gabriel V33 Video (1)
• Gabriel Amps Clothing Line (0)

I decided that in the end I’ll post an un-edited video just the way it is. This way hoping that the listeners will connect with the human, prone-to-failure part of me in some mysterious way, and hopefully get something educational out of it too! Heck if Julia Child did it…

I will have to say that Ed Dale’s videos of The 30 Day Challenge were of IMMENSE inspiration for me, right at the moment when I wanted to throw in the towel!

So, ladies and gentleman here is the unedited, uncut, first video of the Gabrièl V18 guitar tube amplifier:

Related posts

• The Loopy Effect Loop (2)
• Garage TV (0)
• Gabriel V33 Demo by Justin Ostrander (2)
• Gabriel Amps Clothing Line (0)
• The Magic Eye Wink (13)